LCD Keypad Shield LCD1602 kompatibel mit Arduino mit integriertem Display und Tasten

El shield està construït amb PCB de fibra de vidre (FR4), components electrònics estàndard i un mòdul LCD amb controlador compatible HD44780. Les dimensions típiques són 80 mm x 58 mm x 23 mm, i el pes ronda els 42 g. El paquet generalment només inclou el shield muntat, sense cables ni documentació física; es recomana verificar si el venedor afegeix manual o accessoris addicionals.

El LCD i el shield estan dissenyats per funcionar a 5 V±0,25 V, amb un consum típic inferior a 50 mA amb el backlight encès. Operen de manera fiable entre 0 °C i 50 °C i RH < 80% (sense condensació). Tensions per sobre de 5,5 V poden danyar irreversiblement el controlador o el backlight LED, per la qual cosa es recomana fer servir sempre fonts d’alimentació regulades.

L’ajust del contrast es fa mitjançant un potenciòmetre present al mateix shield, cosa que permet adaptar-lo a diferents angles de visió o condicions de llum. La retroil·luminació es pot activar/desactivar programàticament o amb un jumper segons la versió. No requereix manteniment periòdic; tanmateix, es recomana evitar ambients humits o amb excés de pols i netejar suaument la pantalla si cal.

The shield is built with FR4 fibreglass PCB, standard electronic components and an LCD module with a compatible HD44780 controller. Typical dimensions are 80 mm x 58 mm x 23 mm, and the weight is around 42 g. The package generally includes only the assembled shield, without cables or printed documentation; please check whether the seller adds a manual or extra accessories.

The LCD and shield are designed to operate at 5 V±0.25 V, with typical consumption of less than 50 mA with the backlight on. They operate reliably between 0 °C and 50 °C and RH < 80% (non-condensing). Voltages above 5.5 V can irreversibly damage the controller or the LED backlight, so regulated power supplies should always be used.

Contrast is adjusted using a potentiometer on the shield itself, allowing it to be adapted to different viewing angles or lighting conditions. The backlight can be switched on/off programmatically or via a jumper, depending on the version. No periodic maintenance is required; however, it is recommended to avoid damp or excessively dusty environments and to clean the screen gently if needed.

The shield is built with FR4 fibreglass PCB, standard electronic components and an LCD module with a compatible HD44780 controller. Typical dimensions are 80 mm x 58 mm x 23 mm, and the weight is around 42 g. The package generally includes only the assembled shield, without cables or printed documentation; it is advisable to check whether the seller includes a manual or additional accessories.

The LCD and shield are designed to operate at 5 V±0.25 V, with typical consumption below 50 mA with the backlight on. They operate reliably between 0 °C and 50 °C and RH < 80% (non-condensing). Voltages above 5.5 V can irreversibly damage the controller or the LED backlight, so regulated power supplies should always be used.

Contrast is adjusted using a potentiometer on the shield itself, allowing it to be adapted to different viewing angles or lighting conditions. The backlight can be switched on/off programmatically or with a jumper, depending on the version. No periodic maintenance is required; however, it is recommended to avoid damp or excessively dusty environments and to clean the screen gently if necessary.

Shielden är byggd med PCB i glasfiber (FR4), standardelektronikkomponenter och en LCD-modul med kompatibel HD44780-styrenhet. De typiska måtten är 80 mm x 58 mm x 23 mm, och vikten ligger runt 42 g. Förpackningen innehåller vanligtvis endast den monterade shielden, utan kablar eller fysisk dokumentation; kontrollera om säljaren lägger till manual eller extra tillbehör.